Dell Samsung 14V 3A

You are here : Sunvalley > LCD AC Adapters > LCD AC Adapter

Replacement for Dell Samsung 14V 3A

Output: DC14V 3A
Power: 42W
Outlet: 3-prong
Dimension : 6.5mm/4.4mm Tip
Net Weight : 282 g
Product Code : 93-05061-013
Brand : Replacement

Price : US $

Description:

Dell Samsung 14V 3A AC Adapter

Input: AC100-240V (worldwide use)

Output: DC14V 3A

Power: 42W

Outlet: 3-prong

Connecter size:
    Internal Diameter: 4.4mm
    External Diameter: 6.5mm
    With pin inside

Brand New Replacement Product, works as genuine parts, 100% OEM Compatible!!

Remark: US power cord is included

Replace the following part numbers:

AD-4214N, GH17P, AD-4214L, BN44-00080A, SCV420108, BN44-00058A,

Compatible with the following models:

1701FP, 1702FP, 1900FP, 1500FP series, 17' / 19'LCD, Samsung LTM1555,Samsung LTN1565 LCD 15' LCD monitors, Samsung LTM1555, Samsung LTN1565 15' LCD monitors, SyncMaster 150MP, SyncMaster 1501MP SyncMaster 152B, SyncMaster 152T, SyncMaster 570S TFT, SyncMaster 570V TFT 15' LCD monitors, SyncMaster 170T, SyncMaster 172B, SyncMaster 172S, SyncMaster 172T, SyncMaster 171P 17' LCD monitors, SyncMaster 180T 18' LCD monitors, SyncMaster 191T, SyncMaster 192T, 19' LCD monitors, SyncMaster 760V TFT, SyncMaster 770 TFT, 17' LCD monitors,

Porduct Warranty

6 months warranty

Product Knowledge

The Basics when Looking for an AC Adapter.

1) Output Specs Voltage and milli-Amps
2) Regulated /Un-Regulate
3) Connector plug size/Output Polarity
1) Output Voltage and milli-Amps

Try and Find your specifications for an adapter. On the old adapter, Device wishing to supply or specification page in an owners manual. The specs are usually given as volts and milliAmps (mA). Always try and find a exact match of specs. This is the safest way to go. Where an exact match is not available a couple general rules of thumb to find a workable adapter.
Choose the closest voltage available. Safer to go lower the higher. Some devices can handle higher without damage but many will not take it. If you choose lower generally the worse that would happen is it would not supply adequate voltage and equipment would not normally be damaged.
Choose milliAmps equal or higher than required

2) Regulated (Switching) or Unregulated (non-switching) Output

Most AC adapters are unregulated, Voltage output of the power supply floats with the load placed on them. Some electronic equipment such as digital cameras or security cameras are very sensitive to the input voltage and so require a Regulated/Switching adapter. A regulated AC adapter guarantees that the output voltage will always be constant.
Do Not use an unregulated supply in place of a regulated one!
Ok to use a regulated (however generally pricer) in place of an unregulated.

3) Output plug size/ Output Polarity

These are measured in mm. I will try and give these measurements as accurately as I can. If the plug is not correct for your application. Radio shack or another supplier may have an adapter or the existing plug can be spliced to the replacement adapter if you be sure to check polarity before attaching to the equipment.
Output Polarity
Adapters with an AC out put this is not an issue however ANY and ALL DC adapters it must be observed or equipment damage most likely will occur.
To determine the polarity of your adapter look for a symbol like this: I will have the same symbol on my auction pages for adapters.